Bromine tablets

$39.99 - $81.99

Killing bacteria is key to a spa / swim spa maintenance

Bacteria thrive in hot water. Chlorine and bromine keep the water clear and protected from bacteria. To keep your spa / swim spa water protected continuously, a residual sanitizer is needed even if the spa / swim spa is equipped with an ozone or UV system.

Brominating Tablets:
  • Dissolve slowly and protect continuously.
  • Organic bromine sanitizes without chlorine order.
  • Ideal for heavy bather loads and commercial spas / swimspas.
  • Apply in a brominator, in a floating dispenser or directly into the skimmer basket.

  1. Fill the chamber(s) of the automatic device with BioGuard bromine tablets.
  2. Set the flow rate according to the manufacturer's recommendations.
  3. The recommended daily dose is approximately 5 g per 1000 L of water (weight of one tablet: 20 g).

NOTE: Heavy use of the spa or swim spa and high temperature may increase the dose used to maintain adequate bromine residue.

WARNING: Direct tablets contact may cause bleaching of spas or swim spas surfaces. 

ADVICE: Persistent foaming, turbidity or malodorous water indicate that the sanitizer level is inadequate. To correct such problems, superchlorinate the spa or swim spa water by adding a superchlorinator such as SpaGuard Bromine Concentrate. Circulate the water for 30 minutes and wait 4 hours before using the spa. Swimming can begin when your free bromine level is in his ideal range wich is between 3.0 and 5.0 ppm.